ach, no, that's an easy one.
Take the tube from the crankcase to the air filter (breather tube), and clean it up real good (dish soap and hot water, makes a nice mess). Get a brillo pad or other steel hairball type scrubby pad, wash _that_ until all of the cleaning product is off of it.
Then you cut or rip off enough of the steel to loosely pack the breather tube with steel hairball. You don't want to occlude airflow, as such, but instead provide a lot of nice surfaces for that oil mist coming out of the crankcase to impact on, which will cause it to accumulate on the hairball, liquify, and run back into the crankcase, instead of into the air filter.
"No can brain today. Want cheezeburger."
From NGE: Nobody Dies, by Gregg Landsman
http://www.fanfiction.net/s/5579457/1/NGE_Nobody_Dies
Take the tube from the crankcase to the air filter (breather tube), and clean it up real good (dish soap and hot water, makes a nice mess). Get a brillo pad or other steel hairball type scrubby pad, wash _that_ until all of the cleaning product is off of it.
Then you cut or rip off enough of the steel to loosely pack the breather tube with steel hairball. You don't want to occlude airflow, as such, but instead provide a lot of nice surfaces for that oil mist coming out of the crankcase to impact on, which will cause it to accumulate on the hairball, liquify, and run back into the crankcase, instead of into the air filter.
"No can brain today. Want cheezeburger."
From NGE: Nobody Dies, by Gregg Landsman
http://www.fanfiction.net/s/5579457/1/NGE_Nobody_Dies