A serious post - What if someone were to discover handwavium, and what if it is me

[aether]

The thing is, you haven't told us how to build one of these coils... or told us anything else specific. All you've shared so far is text that's indistinguishable from posts made by people who think the laws of thermodynamics don't apply to them.

Fenspace is built on a dream, it's true, but it's also built on sharing of information.

Hi, sorry for not replying sooner.

Yes, that is true, of course there is no point in exposing my work if no one is interested, casting pearls before swine.

At the same time, your post at least suggests some degree of interest, so maybe I should not remain so secretive.

So then the next question is, how do I prove to you at least as much as I am able to, that I have a technology that can produce a energy that some, most people can feel?

And the answer is that I must share nuts and bolts type practical info, and try and keep it simple.

One important point I would want recognized is that if you want to increase the odds of recognizing a valid discovery, you should not just try one embodiment, but you should try a few, and on a few people to increase the odds of success.

So are you willing to make something to see if it works for you?

Here is an image of the latest design.

You could print this and use wire and cut out bits of metal (for the center of the circle) to make this of a physical design.

This is maybe not the fastest to make design, I could make designs you could make faster, this is just one I finished...

BTW, if you were copying this design, you would not do the inner circles as shown, they would just be multi-turn closed loop coils and the reason they look like that is that I am trying to show how it is multi turn.

I would also like to describe an improvement that is hard to draw and does not show up in that image.

You could make only part of this image and it might work.

Indeed, believe it or not, about about as many as 50% of people can feel the energy light makes from displaying these patterns.




So the best way to wind the coils is to strip only one end of the wire (no electrically conductive contact), wind the uninsulated end on a lazy right handed (or left, produces a different energy, left can be unpleasant, but might be easier to feel) helix around the other end, with the rest of the uninsulated end, wrap that in the same way (right or left handed) starting tight but getting loose...

That looks like this...

This is a zoomed in of a portion of arc of a coil...  The double vertical lines are meant to show that this is just a section of it.

If you place your hand over the a coil made this way, you might feel something, warm, cool, tingle, pressure etc...

If you only made the outer half circle thing and put a regular ring or can, or loop of wire in the center, it might be enough.

If you only join a wire the way shown into a loop, that might do it.

If you only build the doohickey at the top with the 2 bits of wire with the ends of the wire arranged just as shows so that the ends if the wires are pointing at the sides of the ends...  That might do it.

If you only make 3 separate shorted concentric coils, with the inner coil having the most turns, the middle coil having fewer, and the inner coil having the most turns, that might do it.

The cross in the middle could be ignored, try it with and without...

If you want me to make this and film making it with a crappy camera, I will, it's not that hard to make...